This Intelligent Battery Chargers offer an ideal way of charging any type of lead acid battery safely and reliably. The rugged, fully protected unit (IP65) can be used in a variety of applications including on commercial ships, mega yachts, vehicles, and in depots and workshops.
This Series is suitable for all types of lead acid batteries. Charging is through a 3 stage system. The first stage is the bulk charging phase. This state is indicated when the yellow LED is illuminated and continues through stage 2 of the process. When the current is below 10% of maximum output, the charger automatically adjusts to reduce the output voltage to reliably top up the battery. At this stage the green LED is illuminated indicating that the battery is fully charged. Should the voltage level fall below the nominal values during the maintenance stage, the charger will go back to step one and repeat the process.
The charger is enclosed in a rugged, anodized aluminum extrusion protected from dust, damp and impact to IP65. The unit can be installed practically anywhere, on commercial ships, mega yachts, vehicles, and in depots and workshops.
| Input voltage range | 180 VAC – 270 VAC (reduced output below 170 VAC) |
| Input over voltage | 285 VAC |
| Output voltage (12V units) | 13,5 VDC – 14,5 VDC according to charge cycle (STD 14,4) |
| Output voltage (24V units) | 26,8 VDC – 29,0 VDC according to charge cycle (STD 28,8) |
| Power conversion efficiency | Typically 88-91% |
| Off load current | <2 mA |
| Operating temperature | -30 °C - +55 °C |
| Storage temperature | -55 °C - +85 °C |
| Casework | Anodised aluminium, dust, water and impact protected to IP65 |
| Connections | Input - IEC lead, Output – Flying lead |
| Output indicators | Yellow and green LEDs according to cycle |
| Mounting method | By 4 screws |
| Safe area protection: | |
| Over current | Current limited to maximum ratings of each model |
| Over heat | Internal control to reduce output in over temperature situations |
| Transients | Protection both on input and output |
| Wrong polarity protection | With fuse on output |
| Approvals | 2004/108/EC General EMC |
| 206/95 Low Voltage Directive | |
| 93/68/EEC CE Mark | |
| Designed to | EN61204-3, EN60335-2-29, EN 55022B |
| Markings | CE |
There are no reviews written yet about this product..
Here you see comparable items purchased by other customers.
