This E95 Mechanical control lever for heavy and duty applications is available in many versions. The following points must be determined (and selected here from the pull-down lists) when placing an order:
Lever function:
- standard (simple/plane) version
- with retention/friction function
- with a snap-in function for the neutral position
- with a snap-in function for the neutral position and with retention/friction function
Mounting orientation:
- standing version
- laterally lying version
Thread size outside and inside the lever (can be seen in the drawing with "M1" and "m1"):
On request (mail to [email protected]) you can also get the appropriate Bowden cable (push/pull cable) from us. To determine the Bowden cable, we need the desired length in cm and the definition of the connection on the machine side (the answer regarding threaded connections M1 and m1 is then omitted, as these are already generated automatically). The Bowden cables we supply come in the following versions:
- M5 x 0,8
- M6 x 1
- M8 x 1,25
- M10 x 1,5
Technical Information
- Different mounting orientations / positions: standing version or laterally lying version
- Maximum stroke [mm]: 85
- Maximum working load (on the cable) [N]: 1000
- Lever ratio: 7,3 : 1
- possible to connect either push-pull or Flexball cables
- Electrical signalling of the lever’s position possible via micro-switch or via inductive sensor
